TPH Steel Pipe Lifting Clamp for Pipe Handling | Heavy Duty Pipe Clamp
In the hoisting of large-diameter steel pipes, deformation of the pipe ends and scratches on the coating are the main reasons for acceptance failure. The TPH type lifting clamp adopts a flat tongue design, which can be firmly inserted in extremely limited gaps and is specially designed to protect the edges of the pipe ends.
Specifications
| Model | WLL/Pair | Jaw Opening | Weight/PC |
| TPH-1.5 | 1500 kg | 0-40 mm | 1.5kg |
| TPH-3.0 | 3000 kg | 0-40 mm | 3kg |
| TPH-4.0 | 4000 kg | 0-50 mm | 4kg |
| TPH-6.0 | 6000 kg | 0-50 mm | 5kg |
| TPH-8.0 | 8000kg | 0-70mm | 6.7kg |
| TPH-12.0 | 12000kg | 0-70mm | 10kg |
| TPH-16.0 | 16000kg | 0-70mm | 13g |
| TPH-18.0 | 18000kg | 0-70mm | 15kg |
Features
- Slim Profile Design: The thin jaw design allows for easy insertion into the ends of narrow or tightly stacked pipes.
- Protective Lining (Optional): Can be equipped with plastic or polyurethane pads to prevent damage to the pipe edge and internal coating.
- Versatile Tonnage: Available from 1.5 tons to 18 tons to handle everything from water pipes to oil casings.
Safety Instructions
- Use in Pairs: TPH clamps must always be used in pairs with a spreader beam or a 2-leg sling.
- Lifting Angle: Keep the lifting angle between 60° and 90° for optimal stability.
- Edge Inspection: Ensure the pipe end is not too thin or sharp to avoid cutting into the clamp jaw.
Reviews
There are no reviews yet.