YC Type Beam Clamp / Girder Suspension Anchor
The YC Type Beam Clamp provides a quick, portable, and ultra-secure solution for creating temporary or permanent overhead anchor points. Engineered with a synchronous dual-jaw threaded spindle, it automatically aligns itself to the exact center of your I-beam flange. This ensures an even distribution of weight, maximum stability, and total peace of mind during heavy lifts.
Technical Specifications & Dimensions
| Model | WLL (Ton) | I-Beam Range (mm) | Test Load(KN) | Weight (kg) |
|---|---|---|---|---|
| YC-1T | 1 | 75-220 | 12.3 | 3.8 |
| YC-2T | 2 | 75-220 | 24.5 | 4.6 |
| YC-3T | 3 | 80-320 | 36.8 | 9 |
| YC-5T | 5 | 80-320 | 61.3 | 11 |
| YC-10T | 10 | 90-320 | 122.5 | 16 |
Essential Safety Practices for Operators
-
Strictly Vertical Use Only: The YC Type Beam Clamp is designed primarily for vertical suspension. Do not apply side loads or pull at an angle unless using specialized models with cross-loading ratings.
-
Full Flange Engagement: Ensure that both jaws are fully engaged and clamped tightly against the taper or flat face of the flange before applying any weight.
-
Pre-Lift Inspection: Check the central spindle for debris, thread wear, or deformation prior to each lifting shift.
Reviews
There are no reviews yet.